Wizard Up30 M Rev. 0 01/02/2018
Pag. 3
CAUTION
This document is exclusive property of HTC s.r.l .. It is forbidden to reproduce, even partially, images, texts or
contents without written authorization.
CAUTION
A copy of the manual needs to be given to the operator, and it must be ascertained that he has
seen it and therefore knows how to safely drive the machine. The safety of the use of the
machine is guaranteed only by scrupulously following the functions listed in this manual.
The owner and/or the production manager is obliged to provide the user of the
with all the information and
assistance necessary to safeguard his physical health.
1 – INTRODUCTION
This manual contains instructions for handling, installation, use and maintenance of the device manufactured by HTC s.r.l. and named Wizard UP30M.
CAUTION
The observance of the instructions contained in this manual, allows to operate during the phases of handling,
installation, use and maintenance in safety conditions ensuring, moreover, the regular operation of the machine.
HTC s.r.l. declines all responsibility due to negligence and failure to comply with these instructions.
2 – GENERAL SAFETY AND ACCIDENT PREVENTION STANDARDS
Pay max attention to the warning signs described in this manual. There are three levels of danger:
DANGER
This signal warns that if the operations described are not correctly performed, the operator is exposed to serious
risks of possible injury, long-term damage or death.
CAUTION
This signal warns that if the operations described are not correctly performed, the operator is exposed to risks of
possible injury, long-term damage or death.
CAUTION
This signal warns that if the operations described are not correctly performed, the machine may be damaged.
This manual is intended for the user and for those responsible for the correct and safe use of the machine. Read carefully the warnings contained in it
that provide indications for optimal and risk-free use. Familiarize with the controls and operations prescribed for a safe use. Keep this manual always
with the machine in order to make any future consultation possible. The manual must follow the machine in case of transfer.
In case of damage or loss, you can ask for a duplicate the manufacturer that will send a copy. The content of this is in compliance with the directive
2006/42/CE.
To Next Page