Wizard Up30 M Rev. 0 01/02/2018
Pag. 5
Do not clean or touch any moving mechanical parts.
The use of non-adherent clothing (eg scarves, ties, etc.) can be dangerous. Always use tight clothing.
Immediately remove oil / grease from the working area to prevent the risk of slipping / tripping.
3 – WIZARD UP30M LIFT DESCRIPTION
This machine is a mid-raise lift for vehicles, double platform and single scissor, designed to lift light vehicles in order to allow repair. ‘M’
version points out the possibility to move the lift in any part of the workshop.
The lift has been designed for exclusive use indoors and it has not been foreseen that it can be used to lift people.
The lift consists of 2 platforms mechanically independent operated by a pair of hydraulic cylinders. The synchronization of the platforms is
guaranteed by the presence of two torsion bars that rigidly connects scissors.
The lift has a capacity of 3000 kg.
CAUTION
The use of oil at a higher pressure than the maximum recommended could compromise the safe use of the
machine. Always check that the oil supply pressure does not exceed the recommended value.
CAUTION
The use of the machine it is not intended in places where the temperature is lower than -10 ° C, as it may
cause the reduction of lowering/lifting speed.
Do not exceed the maximum capacity of the lift.
CAUTION
It is not allowed any use other than that for which the machine was designed.
The execution of work not foreseen in the design phase could jeopardize the correct functioning of the
machine, generating unforeseeable risk.
To Next Page