QS Series Basic Operator's Guide
Day/night backlit
The QS Series printer lets you print on the back of media.
The back image — the image to be viewed through the media
— is mirrored. This is done by printing on the opposite side
of the printer with the software manipulating the image.
1. From the VUTEk User Interface main window, click the
image in the active image window to open the Print
Options dialog box.
2. Check Mirror.
3. Choose the media type.
4. Choose any options you want to use.
5. Click Apply ( ).
6. Load the media on the right side of the fence as you face
the rear of the printer. Align the media as you would on
the left side.
7. Click Print ( ).
28 OMM-00038-US English-F
To Next Page
Loading...
Need help?
General
