INFO:
The EFOY Pro charges the connected battery and the battery supplies the
power to the application or to the electrical loads.
The EFOY Pro must only be used to charge lead batteries that conform to
the technical specifications of the device (see chapter 3.3 "Specifications"
on page 16).
The EFOY Pro can charge 12 V and 24 V batteries (Factory settings: lead
batteries; Adjustable: LiFePO4) and automatically detects which battery is
connected.
The charging parameters for automatic mode can be adjusted individually
using the expert menu in the operating panel (see chapter 5.2.5 "Expert
menu" on page 44) or using a computer (see the user manual for the in-
terface adapter).
The settings and parameters for LiFePO4 batteries can be found in chap-
ter 5.2.5 "Expert menu" on page 44.
To protect the battery, the additional use of deep battery protection is
recommended to disconnect the load from the battery when the battery
voltage is low.
Check polarity before you connect the device.
To Next Page
Loading...
