7.3 Adding service fluid
If the service fluid level is low, the yellow LED on the EFOY Pro fuel cell
comes on and the message "Please refill service fluid" appears on the
operating panel display.
WARNING!
If this message is displayed frequently, check that the air supply at the in-
stallation location is sufficient. There is no need to add service fluid under
normal operating conditions.
Never refill the fuel cell with more than one bottle of service fluid at a
time.
Use original EFOY service fluid only.
Switch off the EFOY Pro fuel cell before refilling with service fluid. Dis-
connect the charge line.
Make sure that no dirt or foreign bodies enter the fill opening.
1. Use a clean pair of scissors to cut off
the tip of the bottle.
INFO:
The service fluid bottle is for one
time use only.
2. Disconnect the exhaust hose from
the device.
3. Insert the tip of the bottle into the
connection nozzle on the device and
slowly squeeze the entire contents
into the opening.
4. Use a cloth to wipe away any excess
service fluid that may spill over.
To Next Page
Loading...
