Z Series Assembly Manual
© 2023 EFT Electronic Technology Co. Ltd. All Rights Reserved.
Safety Guidelines
1. Please carefully check the goods according to the product l ist before assembly, complete the installation according
to tutorial video or this manual.
2. Make s ure that you have well known t he each part of this product before a ssembling this product. Do not ass emble
it violently. If you have a ny questions when ass embling this product, please contact EF T or the authorized agency.
3. Not being a toy, plus for certain safety risks, the product is not suitable for those who are under 18 years old, or
those who have no or limited capacity for civil conduct, or those with mobility impairments, or those restricted by
existing laws ， regulations and policies. Please keep the product out of reach of children and be particularly cautious
while there are children present.
4. Before installing this product, please make sure that you have fully understood the features and functions of the Z
series products, have professional installation and debugging techniques, and strictly follow t his manual to install the
various parts of the drone. Incorrect assembly may cause personal injur y or the device is not running properly.
5. During assembly, please check each component carefully to see that it is properly connected and all in the correct
position.
6. During t he installation, please operate carefully to avoid damage and loss caused by improper operation.
7. When installing the water pipe, do not bend it much to avoid creases and affect the spraying effect.
8. For replacement parts, please purchase original repair parts.The components from other sources may cause failure
and users shall take the risk.
9. Unauthorized disassembly, modification, installation or use of this product for purposes other than the original
design is prohibited, otherwise the warranty will be invalidated.
10. Be sure to connect and insert the battery and turn on the power after completing all the installation and wiring.
11. Please complete all assembly and no-load flight test , s praying inspection, and t hen carry out field operations.
12. Before test , please confirm whether the remote control can be connected normally and whether the battery
power is sufficient. During testing, make sure t he drone is in an open area to avoid hitting obstacles or people.
Warning
Improper assembly will affect product performance, please ensure that you have professional installation and
debugging techniques, and strictly follow with this manual. We do not accept a ny return or exchange due to subjective
factors, such as subjectively determined t hat it is not easy to use, don't know how to use, and the performance does
not meet the expected, which are non-product quality problems. All damages and risks from personal reasons during
assembly and operation shall be borne by t he users, we do not ass ume any related liability.
To Next Page
Loading...
