56V LITHIUM-ION CORDLESS HEDGE TRIMMER20
SIDE CUTTING
When trimming the sides of the hedge, begin at the bottom and cut upwards
(see Fig. 8). Trim the side of a hedge so that it will be slight narrower at the top.
This shape will expose more of the hedge, resulting in a more uniform growth.
8
MAINTENANCE
WARNING:
When servicing, use only identical replacement parts. Use of any
other parts may create a hazard or cause product damage. To ensure safety and
reliability, all repairs should be performed by a qualified service technician.
CLEANING
WARNING:
To avoid serious personal injury, always remove the battery pack
from the product when cleaning or performing any maintenance.
Use a soft brush to remove debris from all air intakes and cutting blade.
To remove pitch and other sticky residue, spray the blades with resin solvent.
Run the motor briefly so that the solvent is event distributed.
Wipe the surface with a dry cloth.
To Next Page
Loading...
