EGO POWER Plus ZT5200L - Page 69

6956-VOLT LITHIUM-ION ELECTRIC ZERO TURN MOWER — ZT5200L/ZT5200L-FC
LCD
Display
Description
Fault code
on LCD
Mower
Status
Indicator
Audio
Indicator
Cause Solution
see “Fault
code”
Left blade
motor
fails in
rotation
PCBA con-
trolled left
blade motor
fails
607/A07 n/a one beep PCBA failure
Have repairs performed by a qualied
service technician.
Plug (Triple-
phase, power
wire) con-
necting the left
blade motor
with the corre-
sponding PCBA
is loosened.
509 n/a one beep
Loose connec-
tion
Inspect the blade rstly. If it is loos-
ened, use a 9/16 in (14 mm) torque
wrench to tighten the bolt clockwise.
The recommended torque for the
blade bolt is 36-41 ft-lb (50-55 Nm).
Otherwise, have repairs performed by
a qualied service technician.
Left blade mo-
tor fails
509 n/a one beep Motor failure
see “Fault
code”
Right
blade
motor
fails in
rotation
PCBA con-
trolled right
blade motor
fails
507/A07 n/a one beep PCBA failure
Have repairs performed by a qualied
service technician.
Plug (Triple-
phase, power
wire) connect-
ing the right
blade motor
with the corre-
sponding PCBA
is loosened.
609 n/a one beep
Loose connec-
tion
Inspect the blade rstly. If it is loos-
ened, use a 9/16 in (14 mm) torque
wrench to tighten the bolt clockwise.
The recommended torque for the
blade bolt is 36-41 ft-lb (50-55 Nm).
Otherwise, have repairs performed by
a qualied service technician.
Right blade
motor fails
609 n/a one beep Motor failure
see “Fault
code”
Middle
blade
motor
fails in
rotation
PCBA con-
trolled middle
blade motor
fails
507/607 n/a one beep PCBA failure
Have repairs performed by a qualied
service technician.
Plug (Triple-
phase, Power
wire) connect-
ing the middle
blade motor
with the corre-
sponding PCBA
is loosened.
A09 n/a one beep
Loose connec-
tion
Inspect the blade rstly. If it is loos-
ened, use a 9/16 in (14 mm) torque
wrench to tighten the bolt clockwise.
The recommended torque for the
blade bolt is 36-41 ft-lb (50-55 Nm).
Otherwise, have repairs performed by
a qualied service technician.
Middle blade
motor fails
A09 n/a one beep Motor failure