EGO POWER Plus ZT5200L - Page 70

56-VOLT LITHIUM-ION ELECTRIC ZERO TURN MOWER — ZT5200L/ZT5200L-FC70
LCD
Display
Description
Fault code
on LCD
Mower
Status
Indicator
Audio
Indicator
Cause Solution
see “Fault
code”
Left lap
bar fails
Left lap bar
controlling
PCBA fails.
311/412 OFF one beep
PCBA failure
Have repairs performed by a qualied
service technician.
Plug con-
necting the
controlling
PCBA, located
in the lap bar,
is loosened.
Loose connec-
tion
Have repairs performed by a qualied
service technician.
see “Fault
code”
Right lap
bar fails
Right lap bar
controlling
PCBA fails.
411/312 OFF one beep
PCBA failure
Have repairs performed by a qualied
service technician.
Plug con-
necting the
controlling
PCBA, located
in the lap bar,
got loosened.
Loose connec-
tion
Have repairs performed by a qualied
service technician.
see “Fault
code”
Parking
brake
fails,
the tool
cannot be
driven.
Parking brake
PCBA, which
is in the front
frame assem-
bly, is broken.
309/409 OFF one beep PCBA failure
Have repairs performed by a qualied
service technician.
Parking brake
switch and/or
wire is broken.
801 OFF one beep
Wire/Switch
failure
OFF Charging Port Fault
n/a Solid RED n/a
The charging
port is in open
circuit.
Have repairs performed by a qualied
service technician.
n/a Solid RED n/a
There is no
power supply.
Check the wall outlet whether there is
120V supplied or the socket is good.
n/a Solid RED n/a
The fuse is
blown.
Have repairs performed by a qualied
service technician.
see “Fault
code”
Charging Port Fault 204 n/a one beep
The charging
port is in open
circuit.
Have repairs performed by a qualied
service technician.