Ei Electronics Ei650iRF User Manual

21
6. Carefully align the alarm with the base, push it home and twist it gently on. Install all
of the other alarms in the same way.
7. Press the test button on each alarm to make sure
that the device is working (Figure 11).
8. If you are fitting wired smoke alarms, read
section 4.2.
9. If you are fitting radio-linked alarms,
please follow the instructions for your
radio module.
Install all of the other alarms in the same way.
Fig. 11

Ei Electronics Ei650iRF Specifications

General

Brand	Ei Electronics
Model	Ei650iRF
Category	Smoke Alarm
Language	English