Ei Electronics Ei650iRF User Manual

22
3. Installation
Protecting the alarms from tampering (if required)
The alarm can be protected against tampering to stop it from being removed
without permission.
Remove the small bar from the base as shown in Figure 12a.
To remove the alarm from the ceiling, the catch must be released using a small
screwdriver (press the catch towards the ceiling) and the alarm must then be twisted
off (see Figure 12b).
Fig. 12a
Break out
small bar
Fig. 12b
Push the catch up and turn the alarm
anticlockwise to remove it

Ei Electronics Ei650iRF Specifications

General

Brand	Ei Electronics
Model	Ei650iRF
Category	Smoke Alarm
Language	English