27
When the file reaches the reference point, E-CONNECT will start Apical
Reverse ,Apical Slow Down and Apical Torque Reduction
function（If the function is activated），
Note
Make sure to connect the two devices with right position.
After connecting the two devices with the wire, gently push and pull the interface
to ensure that the connection is stable, otherwise the data transmission may not
be accurate.
in certain cases, for example when the canal is blocked, the measurement may be
unable.
The will not be able to perform a precise measurement for every time, especially in
cases of abnormal or unusual morphology of the root canal. The user need
coordinate with x-ray to check the results of the measurement.
If the meter does not move when you enter the file, it is possible that the unit is
not working normally, therefore, stop using.
Warning
Do not use a non - specified data transfer cable，otherwise will damage the device.
Do not hit device and splash liquids
To Next Page
Loading...
