To Next Page
L
Larry TateAug 5, 2025
What to do if my Eighteeth Ultra X is beeping?
- BbenjaminlamAug 5, 2025
If your Eighteeth Dental equipment beeps, it indicates that the battery power is very low. You should charge the battery immediately.
What to do if my Eighteeth Ultra X is beeping?
If your Eighteeth Dental equipment beeps, it indicates that the battery power is very low. You should charge the battery immediately.
Why is my Eighteeth Ultra X not turning on?
If the power is not turning on for your Eighteeth Dental equipment, it could be due to a discharged battery. In this case, charge the battery. Alternatively, you may not be pressing the main switch long enough. Ensure you press and hold the main switch for more than 0.5 seconds.
What to do if the tip of my Eighteeth Dental equipment does not vibrate?
If the tip of your Eighteeth Dental equipment isn't vibrating, first, check its installation to ensure it's correctly in place. If the issue persists, the tip might be broken, and you may need to replace it with a new one. If neither of these resolves the problem, the main board might be faulty.
General| Brand | Eighteeth |
|---|---|
| Model | Ultra X |
| Category | Dental equipment |
| Language | English |
Identifies and labels all physical components of the Ultra X device.
Details and illustrates each component and accessory included with the Ultra X.
Defines the intended use of the Ultra X in endodontic treatment using ultrasonic energy.
Lists conditions or patient types for which the Ultra X should not be used.
Instructions for correctly fitting the silicone sleeve onto the device.
Guide on how to properly attach the operational tip to the handpiece.
Steps for safely detaching the tip from the handpiece using the provided wrench.
Procedures for connecting the charging adapter and power supply to the device.
Explains the function of each button and LED indicator on the device's control panel.
Details the battery charging process and indicators for power levels.
Step-by-step guide on how to turn on, use, and turn off the Ultra X device.
Introduces the importance of cleaning, disinfection, and sterilization for hygiene and safety.
Provides essential advice and precautions for safe and effective cleaning procedures.
Lists parts that can be sterilized using an autoclave and the process.
Outlines specific methods for disinfecting various components using ethanol.
States the expected service duration for the Ultra X handpiece.
Provides guidelines for the proper disposal of the device and its components.
Outlines the manufacturer's rights regarding product modifications and intellectual property.
