Why is there no sound on my Eighteeth AirPex?
If your Eighteeth Dental equipment isn't making any sound, the beep volume might be set to 0. To fix this, simply adjust the beep volume to 1, 2, or 3.
What to do if my Eighteeth AirPex Dental equipment power is not turned on?
If the power isn't turning on for your Eighteeth Dental equipment, there are a couple of things to check: * The battery might be flat, so charge it. * You might not be pressing the power switch long enough, so try a long press.
What to do if there is no charge indicator flash on handpiece screen of my Eighteeth AirPex?
If the charge indicator isn't flashing on your Eighteeth Dental equipment's handpiece screen, here’s what you can check: 1. Ensure the APEX locator is correctly placed on the charge base. 2. Charging might already be complete. Refer to the battery instructions. 3. If neither of these resolves the issue, the charge base might be broken, in which case you should contact your distributor.
Identifies all components of the AirPex device with labels and numbers for easy recognition.
Lists optional accessories that can be purchased separately to enhance device functionality.
Specifies the intended purpose of the AirPex device for measuring canal length in dental procedures.
Lists conditions or situations where the device should not be used due to safety or effectiveness concerns.
Details the process of connecting the file clip, lip hook, and extension cord to the Apex locator.
Explains how to connect the Apex locator to its charge base for powering and charging.
Explains how to charge the device and indicates low battery status with visual cues.
Details the procedure for testing the functionality of the Apex locator using a tester.
Outlines operational steps and specific conditions that may affect measurement accuracy.
General| Brand | Eighteeth |
|---|---|
| Model | AirPex |
| Category | Dental equipment |
| Language | English |
To Next Page