Eighteeth AirPex - EMC Tables

10 EMC Tables
Page 32 / 41
10.EMC Tables
Guidance and manufacturer’s declaration – electromagnetic
emissions
The AirPex is intended for use in the electromagnetic environment specified
below. The customer or the user of the AirPex should assure that it is used
in such an environment.
Emissions test
Compliance
Electromagnetic environment -
guidance
RF emissions
CISPR 11
Group 1
The AirPex uses RF energy only
for its internal function.
Therefore, its RF emissions are
very low and are not likely to
cause any interference in nearby
electronic equipment.
RF emissions
CISPR 11
Class B
The AirPex is suitable for use in
all establishments, including
domestic establishments and
those directly connected to the
public low-voltage power supply
network that supplies buildings
used for domestic purposes.
Harmonic
emissions
IEC61000-3-2
Class A
Voltage
fluctuations/flicker
emissions
IEC 61000-3-3
Complies