How to fix LED digital tube if it is not lit on Eighteeth UltraMint?
If the LED digital tube and button indicator on the rear panel of your Eighteeth Dental equipment aren't lighting up after you power it on, the fuse might be broken. Try replacing the T0.5AL 250V fuse in the power adapter or the T1.6AL 250V fuse in the main unit. Also, check if the power plug is making proper contact and plug it in correctly if it isn't.
Why is the water spray too small on my Eighteeth UltraMint Dental equipment?
If the water spray from your Eighteeth Dental equipment is too small, try turning up the water control knob. Also, check the water pressure and increase it if it's low.
What to do if the tip vibrates but there is no water spray on Eighteeth UltraMint?
If your Eighteeth Dental equipment's tip vibrates when you press the foot pedal, but there's no water spray, first check if the water control knob on the handpiece is turned on. Additionally, try draining the waterway with a dental gun to clear any blockage.
Why is the handpiece of my Eighteeth UltraMint Dental equipment heating up?
If the handpiece of your Eighteeth Dental equipment is overheating, try turning up the water control knob. The heat might be caused by the water control knob being set too low.
What to do if tip does not vibrate but there is water spray on Eighteeth Dental equipment?
If the tip of your Eighteeth Dental equipment doesn't vibrate when you press the foot pedal, but there is water spray, make sure the tip is tightened properly.
Why is the tip vibration weakened on my Eighteeth UltraMint?
If the tip vibration of your Eighteeth Dental equipment is weakened, ensure that the working tip is tightened properly.
What to do if the tip does not vibrate and there is no water spray on Eighteeth UltraMint Dental equipment?
If the tip of your Eighteeth Dental equipment isn't vibrating and there's no water spray when you press the foot pedal, ensure the foot pedal is properly plugged in.
How to fix water seepage at the connection between the handpiece and the handpiece cord on Eighteeth Dental equipment?
If you notice water seeping from the connection between the handpiece and the cord of your Eighteeth Dental equipment, the waterproof O-ring may be damaged. Replace the waterproof O-ring to resolve this issue.
What to do if the root canal file does not vibrate on Eighteeth UltraMint Dental equipment?
If the root canal file of your Eighteeth Dental equipment isn't vibrating or the file holder is making noise, tighten the nut.
How to fix LED light if it is not on on Eighteeth Dental equipment?
If the LED light on your Eighteeth Dental equipment is not on, replace the LED light. Also, check the circuit for poor contact.
Details the contents of the package, listing all included components with their identifiers.
Lists all components of the ultrasonic scaler, including part numbers and quantities.
Defines the intended dental applications for the ultrasonic scaler.
Lists conditions or patient types for whom the device should not be used.
Illustrates and labels the components visible on the front of the main unit.
Illustrates and labels the components visible on the back of the main unit.
Provides a step-by-step guide for connecting the main unit, power adapter, and foot pedal.
Details the procedure for attaching and detaching the handpiece to/from the handpiece cord.
Explains how to securely install and remove the scaler tips using the provided wrench.
Describes the buttons, indicators, and display on the main unit's control panel.
Explains the different working modes (Scaling, Periodontal, Endodontic) and their application.
Provides detailed instructions on the sequence of operations for using the ultrasonic scaler effectively.
Details advanced features like the cleaning mode and handpiece LED delay adjustment.
Explains how to activate and use the cleaning mode for the device's liquid circuit.
Describes how to adjust the delay time for the handpiece LED light after operation.
Introduces the importance of hygiene and reprocessing for the scaler components.
Provides essential recommendations for safe and effective cleaning, disinfection, and sterilization practices.
Identifies which components of the scaler can be safely autoclaved.
Details the step-by-step process for reprocessing the ultrasonic scaler components.
Explains the procedure for cleaning components using an automated washer-disinfector.
Details the process for disinfecting the scaler components, emphasizing automated methods.
Describes the automated drying process for the scaler components after cleaning and disinfection.
Covers visual inspection, functional testing, and maintenance after reprocessing.
Guides on how to properly package instruments for sterilization.
Details the recommended steam sterilization methods and parameters for the scaler components.
Provides guidelines for storing sterilized instruments in a dry, clean environment.
References validation reports for the cleaning, disinfection, and sterilization processes.
Provides specific instructions for disinfecting the main unit, power adapter, and foot pedal using Ethanol.
General| Brand | Eighteeth |
|---|---|
| Model | UltraMint |
| Category | Dental equipment |
| Language | English |
To Next Page