Eighteeth AirPex - Troubleshooting

8 Troubleshooting
Page 29 / 41
8.Troubleshooting
When trouble is found, check the following points before contacting your
distributor. If none of these are applicable or the trouble is not remedied
even after action has been taken, the product may have failed. Contact your
distributor.
Problem
Cause
Solution
The power is not
turned on.
The battery is flat.
Charge the battery.
Press the power switch
too short time.
Long press the power
switch.
No charge
indicator flash
on handpiece
screen.
Put the APEX locator on
the charge base in the
wrong location.
Check the location.
Charging is completed.
Checking the
instructions of the
battery.
The charge base is
broken.
Contact your
distributor.
No sound.
Beep volume is set to 0.
Set beep volume to 1,
2 or 3.