GB
- 15 -
Danger!
When using the equipment, a few safety pre-
cautions must be observed to avoid injuries and
damage. Please read the complete operating
instructions and safety regulations with due care.
Keep this manual in a safe place, so that the in-
formation is available at all times. If you give the
equipment to any other person, hand over these
operating instructions and safety regulations as
well. We cannot accept any liability for damage
or accidents which arise due to a failure to follow
these instructions and the safety instructions.
1. Safety regulations
Danger!
Read all safety regulations and instructions.
Any errors made in following the safety regula-
tions and instructions may result in an electric
shock, fi re and/or serious injury.
Keep all safety regulations and instructions
in a safe place for future use.
Danger!
The pump must be powered
via an earth-leakage circuit
breaker (RCD) with a rated
fault current of no more than
30 mA (according to VDE 0100
Part 702 and 738).
The equipment is not designed for use in
swimming pools and paddling pools of any
kind or other bodies of water in which people
or animals may be present during operation.
It is prohibited to operate the equipment if a
person or animal is in the danger area. Ask
your electrician!
•
Before you put the equipment
into operation, arrange for a
specialist to check that the
earthing, protective multiple
earthing or residual-current
operated circuit-breaker circuit
comply with the safety regu-
lations of the power supply
company and work correctly.
•
The electrical plug-in connec-
tions must be protected from
wet conditions.
•
If there is a risk of flooding,
place the plug-in connections
in an area which is safe from
flooding.
•
Strictly avoid pumping aggres-
sive liquids and abrasive sub-
stances.
•
Protect the equipment from
frost.
•
Protect the equipment from
dry running.
•
Take suitable measures to
keep the equipment out of the
reach of children.
•
There is a risk of the liquid
becoming contaminated by
escaping lubricant.
2. Layout and items supplied
2.1 Layout (Figs. 1/2/3)
1. Universal hose connection
2. Integrated cable rewind
3. Intake cage
4. Integrated fl oat switch
5. Handle
6. Suspension eye
7. Non-return valve
2.2 Items supplied
Please check that the article is complete as
specifi ed in the scope of delivery. If parts are
missing, please contact our service center or the
sales outlet where you made your purchase at
the latest within 5 working days after purchasing
the product and upon presentation of a valid bill
of purchase. Also, refer to the warranty table in
Anl_GE-DP_6935_A ECO_7935_N-A_ECO_SPK7.indb 15Anl_GE-DP_6935_A ECO_7935_N-A_ECO_SPK7.indb 15 05.07.2023 13:58:2105.07.2023 13:58:21
To Next Page
Loading...
Need help?
General
