To Next PageTo Next PageWhat to do if thermostat switches EINHELL Water Pump off?
If the thermostat is switching your EINHELL Water Pump off, it could be due to: * An overloaded motor. You can address this by dismantling and cleaning the pump. * Excessive friction caused by foreign substances. Prevent this by filtering out foreign substances.
How to fix inadequate delivery rate in my EINHELL Water Pump?
If your EINHELL Water Pump's delivery rate is inadequate, check the following: * Ensure that the suction height is not too high. * Clean the strainer if it is dirty. * If the water level is falling rapidly, place the suction hose at a deeper level. * If contaminants diminish pump performance, clean the pump and replace any worn parts.
Why won't my EINHELL Water Pump motor start up?
If the motor of your EINHELL Water Pump fails to start, check for these potential causes: * Verify that there is mains voltage; if not, check the voltage. * The pump rotor may be blocked. If so, dismantle and clean the pump.
General| AC input voltage | 220-240 V |
|---|---|
| Power source type | AC |
| Flow rate | 4600 l/h |
| Maximum suction height | 8 m |
| Maximum delivery height | 50 m |
| Maximum operating pressure | 5 bar |
| Maximum input water temperature | 35 °C |
| Package depth | 500 mm |
| Package width | 226 mm |
| Package height | 370 mm |
| Quantity per pack | 1 pc(s) |
| Cable length | 1.5 m |
| Type | - |
| Proper use | Garden |
| Product color | Black, Red |
| Suitable for outdoor use | Yes |
Emphasizes reading all safety regulations and instructions to prevent electric shock, fire, or serious injury.
Details the physical layout of the pump and lists all components included with the delivery.
Specifies intended applications like irrigation and details compatible transport media for the pump.
Instructions for connecting the suction hose, including adapters and the importance of an intake valve.
Guidelines for connecting the discharge hose, including size recommendations and priming operation.
Details how to safely connect the pump to the mains power supply and explains thermostat protection.
Step-by-step guide for initially setting up and running the pump, including priming.
Explains the meaning of different LED colors and their relation to pump status and water flow.
How to read and interpret the intake pressure gauge for troubleshooting priming issues.
A guide to common faults, their causes, and recommended remedies for the garden pump.
Lists parts subject to normal wear and requiring replacement or consumables.
Instructions on how to register problems and provide necessary information for fault resolution.
Details warranty coverage, exclusions, claim procedures, and validity period for the product.
Declares conformity with EU directives and standards for the specified garden pump model.
