EINHELL GE-SA 1640 User Manual

GB
- 26 -
11. Troubleshooting guide
Fault Possible causes RectiÞ cation
Motor does not start a) No electricity in plug
b) Cable defective
c) Switch, switch/plug block
defective
d) Connections to motor or
capacitor disconnected
e) Housing clogged
a) Check line and fuse
b) Check
c) Have machine checked by a
customer service center
d) Have machine checked by a
customer service center
e) If necessary adjust working depth.
Clean housing so that the roller can
run freely
Engine performance
drops
a) Soil is too Þ rm
b) Housing clogged
c) Roller badly worn
a) Change working depth
b) Clean housing
c) Replace roller
Imprecise scarifying
result
a) roller worn
b) Wrong working depth
a) Replace roller
b) Correct working depth
Motor is running,
roller is not
rotating
a) Toothed belt is torn a) By customer service workshop
Important notice! To protect the motor itis equipped with a thermal overload switch which cuts
out when overloaded and starts again automatically after a short cooling-down period.
Anl_GE_SA_1640_SPK7.indb 26 16.02.2017 09:37:31

EINHELL GE-SA 1640 Specifications

General

Power	1600 W
Product color	Black, Red
Working width	400 mm
Number of claws	30
Number of knives	20
Working depth (max)	12 mm
Rear wheels diameter	175 mm
Front wheels diameter	220 mm
Recommended lawn area	800 m²
Collection box capacity	48 L
Adjustable working depth	Yes
Number of working depth positions	4
AC input voltage	230 V
AC input frequency	50 Hz
Package volume	16000 cm³

Weight and Dimensions

Depth	645 mm
Width	528 mm
Weight	12800 g
Package height	320 mm
Package weight	16000 g