EINHELL TC-MS 2112 Operating Instructions

GB
- 17 -
Table of contents
1. Safety regulations
2. Layout and items supplied
3. Proper use
4. Technical data
5. Before starting the equipment
6. Operation
7. Replacing the power cable
8. Cleaning, maintenance and ordering of spare parts
9. Disposal and recycling
10. Storage
Anl_TC_MS_2112_SPK9.indb 17Anl_TC_MS_2112_SPK9.indb 17 19.09.2019 14:23:1519.09.2019 14:23:15

EINHELL TC-MS 2112 Specifications

General

Blade diameter	210 mm
Cutting capacity 90° x 90°	120 x 55 mm
No-load speed	5000 rpm
Mitre cut	45 ° - 45 °
Swivel range	45 ° - 45 °