EasyManuals Logo

EINHELL TC-TS 2025 User Manual

EINHELL TC-TS 2025
Go to English
194 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #30 background imageLoading...
Page #30 background image
GB
- 30 -
Service information
We have competent service partners in all countries named on the guarantee certi cate whose contact
details can also be found on the guarantee certi cate. These partners will help you with all service re-
quests such as repairs, spare and wearing part orders or the purchase of consumables.
Please note that the following parts of this product are subject to normal or natural wear and that the
following parts are therefore also required for use as consumables.
Category Example
Wear parts* V-belt, carbon brushes, table insert, push stick
Consumables* Saw blade
Missing parts
* Not necessarily included in the scope of delivery!
In the e ect of defects or faults, please register the problem on the internet at www.isc-gmbh.info. Ple-
ase ensure that you provide a precise description of the problem and answer the following questions in
all cases:
Did the equipment work at all or was it defective from the beginning?
Did you notice anything (symptom or defect) prior to the failure?
What malfunction does the equipment have in your opinion (main symptom)?
Describe this malfunction.
Anl_TC_TS_2025_2_ECO_SPK9.indb 30Anl_TC_TS_2025_2_ECO_SPK9.indb 30 18.12.2017 08:46:5418.12.2017 08:46:54

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the EINHELL TC-TS 2025 and is the answer not in the manual?

EINHELL TC-TS 2025 Specifications

General IconGeneral
Power2000 W
Blade Diameter250 mm
Cutting Height at 90°85 mm
Cutting Height at 45°65 mm
Table Size640 x 487 mm
Number of Saw Teeth24
Swivelling Range of Saw Blade0° - 45°
Max. Cutting Height at 45°65 mm
Diameter of Suction Adapter36 mm
Working Height850 mm
No-load Speed5000 rpm
Idle Speed5000 rpm

Related product manuals