EINHELL TE-CS 190 User Manual

GB
- 25 -
For EU countries only
Never place any electric power tools in your household refuse.
To comply with European Directive 2012/19/EC concerning old electric and electronic equipment and
its implementation in national laws, old electric power tools have to be separated from other waste and
disposed of in an environment-friendly fashion, e.g. by taking to a recycling depot.
Recycling alternative to the return request:
As an alternative to returning the equipment to the manufacturer, the owner of the electrical equipment
must make sure that the equipment is properly disposed of if he no longer wants to keep the equipment.
The old equipment can be returned to a suitable collection point that will dispose of the equipment in
accordance with the national recycling and waste disposal regulations. This does not apply to any ac-
cessories or aids without electrical components supplied with the old equipment.
The reprinting or reproduction by any other means, in whole or in part, of documentation and papers
accompanying products is permitted only with the express consent of the iSC GmbH.
Subject to technical changes
Anl_TE_CS_190_Kit_SPK7.indb 25Anl_TE_CS_190_Kit_SPK7.indb 25 23.02.16 16:5323.02.16 16:53

EINHELL TE-CS 190 Specifications

General

Soft start	Yes
Product color	Grey, Red
Built-in light	No
Suitable for materials	Particle board, Plastic, Wood
Blade bore	30 mm
Blade diameter	190 mm
Number of teeth	24
Idle speed (max)	5500 RPM
Cutting depth (45º)	48 mm
Cutting depth (90º)	66 mm
Input power	1500 W
Power source	AC
AC input voltage	230 V
AC input frequency	50 Hz
Saw blade included	-

Weight and Dimensions

Depth	370 mm
Width	275 mm
Height	270 mm
Weight	5160 g
Blade thickness	2.8 mm