EINHELL TE-CS 190 User Manual

GB
- 26 -
Service information
We have competent service partners in all countries named on the guarantee certifi cate whose contact
details can also be found on the guarantee certifi cate. These partners will help you with all service re-
quests such as repairs, spare and wearing part orders or the purchase of consumables.
Please note that the following parts of this product are subject to normal or natural wear and that the
following parts are therefore also required for use as consumables.
Category Example
Wear parts* Carbon brushes
Consumables* Saw blade
Missing parts
* Not necessarily included in the scope of delivery!
In the e ect of defects or faults, please register the problem on the internet at www.isc-gmbh.info. Ple-
ase ensure that you provide a precise description of the problem and answer the following questions in
all cases:
•
Did the equipment work at all or was it defective from the beginning?
•
Did you notice anything (symptom or defect) prior to the failure?
•
What malfunction does the equipment have in your opinion (main symptom)?
Describe this malfunction.
Anl_TE_CS_190_Kit_SPK7.indb 26Anl_TE_CS_190_Kit_SPK7.indb 26 23.02.16 16:5323.02.16 16:53

EINHELL TE-CS 190 Specifications

General

Soft start	Yes
Product color	Grey, Red
Built-in light	No
Suitable for materials	Particle board, Plastic, Wood
Blade bore	30 mm
Blade diameter	190 mm
Number of teeth	24
Idle speed (max)	5500 RPM
Cutting depth (45º)	48 mm
Cutting depth (90º)	66 mm
Input power	1500 W
Power source	AC
AC input voltage	230 V
AC input frequency	50 Hz
Saw blade included	-

Weight and Dimensions

Depth	370 mm
Width	275 mm
Height	270 mm
Weight	5160 g
Blade thickness	2.8 mm