To Next PageTo Next PageWhat causes SelfCalibration failure on Eizo ColorEdge CG2420?
If you are experiencing SelfCalibration failure on your Eizo Monitor, refer to the error code table. If an error code is displayed that is not in the table, contact your local EIZO representative.
General| 3D | No |
|---|---|
| HD type | WUXGA |
| Color gamut | 99 % |
| Pixel pitch | 0.27 x 0.27 mm |
| Screen shape | Flat |
| Pixel density | 94 ppi |
| Response time | 10 ms |
| Display diagonal | 24.1 \ |
| Display resolution | 1920 x 1200 pixels |
| Native aspect ratio | 16:10 |
| Vertical scan range | 24 - 61 Hz |
| Maximum refresh rate | 60 Hz |
| Horizontal scan range | 15 - 78 kHz |
| Viewable size, vertical | 324 mm |
| Contrast ratio (typical) | 1500:1 |
| Display number of colors | 1.073 billion colors |
| Viewable size, horizontal | 518.4 mm |
| Display brightness (typical) | 400 cd/m² |
| Supported graphics resolutions | 1920 x 1200 (WUXGA) |
| Power management | Yes |
| USB hub version | 3.2 Gen 1 (3.1 Gen 1) |
| DVI-D ports quantity | 1 |
| VGA (D-Sub) ports quantity | 0 |
| USB Type-A downstream ports quantity | 3 |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Energy efficiency scale | A to G |
| Power consumption (max) | 79 W |
| Power consumption (standby) | 0.5 W |
| Power consumption (typical) | 21.2 W |
| Pivot angle | 0 - 90 ° |
| Tilt angle range | -5 - 35 ° |
| Number of OSD languages | 9 |
| Panel mounting interface | 100 x 100 mm |
| Operating temperature (T-T) | 0 - 35 °C |
| Operating relative humidity (H-H) | 20 - 80 % |
| Certification | CB, CE, TUV/GS, cTUVus, FCC-B, Canadian ICES-003-B, VCCI-B, TUV/Ergonomics, TUV/Color Accuracy (Quick Stability), RCM, WEEE, EAC |
| Product color | Black |
| Market positioning | Graphics design |
| Compliance industry standards | RoHS |
| Cables included | AC, DVI, Mini DisplayPort, USB |
| Harmonized System (HS) code | 85285210 |
Weight and Dimensions| Depth (with stand) | 245 mm |
|---|---|
| Height (with stand) | 551 mm |
| Weight (with stand) | 7800 g |
| Depth (without stand) | 64 mm |
| Width (without stand) | 554.4 mm |
| Height (without stand) | 362 mm |
| Weight (without stand) | 5000 g |
Describes how to change the active input source for the monitor.
Details how to select different display modes for various applications.
Covers detailed settings like Color, Gamma, Brightness, and Color Gamut for precise calibration.
Explains the automatic calibration feature using the built-in sensor for maintaining color accuracy.
Addresses issues related to the monitor not displaying an image or power indicators.
Provides solutions for common display issues like afterimages, noise, and incorrect colors.
Covers troubleshooting for issues not related to picture display, such as USB detection and audio.
Helps resolve problems with the built-in calibration sensor and the SelfCalibration function.
Provides comprehensive technical specifications for the monitor's hardware and performance.
