To Next PageTo Next PageWhy can't SelfCalibration be executed on my Eizo Monitor?
If SelfCalibration cannot be executed on your Eizo Monitor, verify that a color mode for executing SelfCalibration has been set. Also, check that the date and time are set correctly on the monitor and that the execution schedule has been set. Ensure that the calibration targets are set correctly. As an alternative, try calibrating the monitor using ColorNavigator 7.
Why is SelfCalibration canceled while in progress on my Eizo ColorEdge PROMINENCE CG3146?
If SelfCalibration is canceled while in progress on your Eizo Monitor, this may be due to a change in the video signal from the external device. Prevent any changes in the video signal while SelfCalibration is running. If a scheduled SelfCalibration is canceled, it will be executed again when the monitor transitions to the power saving mode after an hour or more, or when the monitor is turned off using the power button. You can also execute SelfCalibration regardless of the schedule.
General| Screen Size | 31.1 inches |
|---|---|
| Resolution | 4096 x 2160 (DCI 4K) |
| Panel Type | IPS |
| Color Gamut | 99% Adobe RGB, 98% DCI-P3 |
| Brightness | 1000 cd/m² |
| Viewing Angles | 178° horizontal, 178° vertical |
| HDR Support | HDR10, HLG |
| Built-in Calibration Sensor | Yes |
| Stand Adjustments | Tilt, Swivel, Height |
| Contrast Ratio | 1, 000, 000:1 (typical) |
| Input Ports | 2 x DisplayPort, 1 x HDMI |
Provides information on the intended use and product suitability for video production.
Details characteristics of the LCD panel, including pixel performance and stabilization time.
Offers guidance on installing the monitor, including precautions against dew condensation.
Recommends periodic cleaning and software updates for optimal performance.
Provides instructions and precautions for cleaning the monitor's cabinet and screen surface.
Offers advice on adjusting brightness and taking breaks to prevent eye strain.
Describes the key features of the monitor, including 4K resolution, HDR support, and SDI connectivity.
Details the front and rear controls and their functions for monitor operation.
Explains how to select and switch between different input sources connected to the monitor.
Guides users on selecting appropriate display modes or color modes for various applications.
Describes how to temporarily adjust HLG System Gamma, Gamma, Brightness, and Black Level.
Explains how to navigate and use the monitor's advanced setting menu for adjustments.
Details various advanced settings available in the menu, including Signal, Color, Screen, and Preferences.
Covers monitor settings for user experience, like power saving, timers, and custom keys.
Explains how to set up and execute the monitor's automatic calibration sensor for color accuracy.
Describes how to set calibration targets for Advanced Mode using the monitor or software.
Details methods for manually executing SelfCalibration or setting up a schedule for automatic calibration.
Explains how to execute functions assigned to the monitor's custom keys.
Guides users on how to assign specific functions to the customizable front panel keys.
Lists all available functions that can be assigned to the monitor's custom keys for quick access.
Explains how to access and operate the administrator settings menu for monitor configuration.
Details the functions available within the administrator settings, such as logo display and key lock.
Describes the applications and characteristics of different SDR and HDR color modes for image creation.
Provides step-by-step instructions to configure monitor settings for SDR and HDR image display.
Explains how to use ColorNavigator 7 software for advanced monitor configuration and calibration.
Addresses issues related to the monitor not displaying an image and power indicator status.
Covers common display issues like brightness, afterimages, noise, and color problems.
Helps diagnose and resolve issues encountered during the SelfCalibration process, including error codes.
Provides solutions for miscellaneous issues like menu display, USB connectivity, and audio output.
Details the process of detaching the stand and attaching the monitor to an installation fixture or arm.
Explains how to connect and switch between multiple external video sources like HDMI, DisplayPort, and SDI.
Describes how to use the monitor's built-in USB hub for connecting peripherals and quick charging.
Lists the technical specifications of the monitor, including panel, video signals, USB, and power details.
Lists registered trademarks and logos associated with the product and its components.
Provides FCC compliance information and warnings regarding radio interference for different regions.
