To Next PageTo Next PageHow to fix incorrect display position on Eizo Monitor?
If the display position on your Eizo Monitor is incorrect, use the “Position” setting in the Setting menu to correct it. If the problem persists, use the graphics board’s utility, if available, to change the display position.
Why do interference patterns or pressure marks remain on the screen of my Eizo FlexScan EV2451-WT Monitor?
If you notice interference patterns or pressure marks on your Eizo monitor screen, leave the monitor displaying a white or black screen. This symptom may disappear over time.
What to do if Eizo FlexScan EV2451-WT Monitor says input signal is out of range?
If your Eizo Monitor displays the message that the input signal is out of the specified frequency range, check whether the PC is configured to meet the resolution and vertical scan frequency requirements of the monitor. You may also try rebooting the PC or selecting an appropriate setting using the graphics board’s utility.
Why is there no audio output from my Eizo FlexScan EV2451-WT Monitor?
If there is no audio output from your Eizo monitor, check if the stereo mini jack cable is properly connected and that the volume is not set to 0. Also, check the PC and audio playback software to ensure they are configured correctly. When using DisplayPort or HDMI input, verify the “Sound Source” setting.
What to do if the color shown on the screen is not correct on my Eizo FlexScan EV2451-WT Monitor?
If the color shown on your Eizo monitor is not correct when using DisplayPort or HDMI input, try changing the “Input Color Format” in the Setting menu.
Why are USB devices not working when connected to my Eizo FlexScan EV2451-WT?
If USB devices aren't working when connected to your Eizo monitor, check the following: Ensure the USB cable is correctly connected. Try using a different USB port on the monitor or on your PC. Reboot your PC. Check whether the PC and OS are USB compliant. Update to the latest USB 3.0 driver provided by each manufacturer, or connect the monitor to the USB 2.0 port. Also, check the PC’s BIOS setting for USB when using Windows.
How to adjust brightness on Eizo Monitor?
If your Eizo Monitor screen is too bright or too dark, you can adjust it using the settings menu. Use the “Brightness” or “Contrast” options to fine-tune the display. If the screen is too bright, you might also want to try changing the Auto EcoView setting to “On.”
How to adjust brightness on Eizo FlexScan EV2451-WT Monitor if the screen is too bright or dark?
If your Eizo monitor screen is too bright or too dark, use the Brightness or Contrast settings in the Setting menu to adjust it. Alternatively, if the screen is too bright, try setting the Auto EcoView setting to On.
How to fix an Eizo Monitor when there is no picture and the power indicator is off?
If your Eizo monitor isn't displaying a picture and the power indicator isn't lit, try these steps: First, ensure the power cord is properly connected. Next, turn on the main power switch located on the rear of the monitor. If it still doesn't work, turn off the main power switch, wait a few minutes, and then turn it back on.
Why is my Eizo FlexScan EV2451-WT screen too bright or too dark?
If your Eizo monitor screen is too bright or too dark, adjust the “Brightness” or “Contrast” settings in the Setting menu. If the screen is too bright, you can also try setting the Auto EcoView setting to “On”, which allows the monitor to automatically adjust the screen brightness based on the ambient light.
General| Screen Size | 24.1 inches |
|---|---|
| Resolution | 1920 x 1200 |
| Panel Type | IPS |
| Brightness | 250 cd/m² |
| Contrast Ratio | 1000:1 |
| Response Time | 5 ms |
| USB Hub | Yes |
| VESA Mount | 100 x 100 mm |
| Aspect Ratio | 16:10 |
| Speakers | No |
| Viewing Angles | 178° (H) / 178° (V) |
| Connectivity | HDMI, DisplayPort, DVI-D |
| USB Ports | 2 x USB 3.0 |
| Color Depth | 8-bit |
| Color Gamut | sRGB |
