4-2. Functions of the “Administrator Settings” Menu
Function Setting Value Description
Auto Input Detection On
O
This function automatically recognizes the connector through
which PC signals are input, and displays images on the screen
accordingly.
• “On”
When the monitor is connected to multiple PCs, if a specic PC
enters power saving mode or no signals are input to the monitor,
the connector is automatically changed to another one to which
signals are input.
• “O”
To be set to this when manually selecting input signals. Select
the signal to display using the operation switch
on the front
of the monitor. For details, see “2-2. Switching Input Signals”
(page 13).
Note
• This product automatically recognizes the connector through
which PC signals are input, and displays images on the screen
accordingly regardless of whether this function is set to On
or O just after the main power switch on the rear side of the
monitor has been turned on.
• When this function is set to “On”, the monitor only enters the
power saving mode when signals are not input from any PC.
• When “Daisy Chain” is set to “On” in the “Preferences” menu,
this function is automatically set to “O”.
Compatibility Mode On
O
If you want to avoid the following phenomena, set this function to
"On".
• The positions of windows and icons are shifted when the
monitor is turned o / on or has returned from the power saving
mode.
• Even when the mouse or keyboard are used, the computer does
not return from sleep.
• When the power to the monitor is turned o, a device connected
to the USB downstream port does not work, or power is not
supplied to the connected device.
• When the power to the monitor is turned o, power is not
supplied to devices connected to the USB-C connector.
Note
• When “Daisy Chain” is set to “On” in the “Preferences” menu,
this function is automatically set to “On”.
25
Chapter 4 Administrator Settings
To Next Page
Loading...
Need help?
General