When two PCs are connected to one monitor, you can link the input signals with the USB ports to use a
USB device connected to the monitor from both PCs by switching between them. For details, refer to
“KVM” (page 26)
.
USB-A
Downstream
USB-C
Downstream
USB cable
(USB-C - USB-C)
CC200SS-5A
or
CC200SSW-5A
(Included)
USB 3.0 cable
(USB-B - USB-A)
(Commercially available
product)
USB-B
Upstream
USB-C
Upstream
USB-CUSB-A
Note
• You can select the input signal to display using the operation switch on the front of the monitor. For details, see
“2-2. Switching Input Signals” (page 13).
• This product provides a function that automatically recognizes the connector through which PC signals are input,
and displays images on the screen accordingly. For details, see “Auto Input Detection” (page 25).
38
Chapter 7 Reference
To Next Page
Loading...
