3 | Advanced Adjustments/Settings
20
Note
• If "Paper" is selected for the color mode, "Paper" is displayed for the gamma value.
• If "DICOM" is selected for the color mode, "DICOM" is displayed for the gamma value.
Super Resolution
Settings: "Off" / "1" / "2"
Blurriness can be reduced by enhancing the outlines of the image.
Choose "1" or "2" (greater enhancement than "1"), whichever suits your preferences.
Advanced Settings - Overdrive
Settings: "Enhanced" / "Standard" / "Off"
This function allows you to set the overdrive intensity based on the use of the monitor.
Image lag can be reduced by using the "Enhanced" setting when displaying moving images.
Note
• Depending on the display resolution and the setting of Picture Expansion [}21], overdrive may
be set to "Off".
Advanced Settings - Hue
Settings: "-50" – "50"
Adjusts the hue.
Note
• Using this function may prevent some color gradations from being able to be displayed.
Advanced Settings - Saturation
Settings: "-50" – "50"
Adjusts the color saturation.
Note
• Using this function may prevent some color gradations from being able to be displayed.
• The minimum value (-50) changes the screen to monochrome.
Advanced Settings - Gain
Settings: "0" – "100"
The brightness of each red, green, and blue color component is referred to as "Gain". The
hue of "white" can be changed by adjusting the gain.
Note
• Using this function may prevent some color gradations from being able to be displayed.
• The gain value changes according to the color temperature.
• When the gain is changed, the color temperature setting changes to "Off".
To Next Page
Loading...
Need help?
General