Eizo FlexScan S2202W User Manual

18
Chapter 2 Settings and Adjustments
2-6 Setting On/Off for the automatic
brightness adjustment function
[Auto EcoView]
The sensor on the front side of the monitor detects the environmental brightness
to adjust the screen brightness automatically and comfortably by using the Auto
EcoViewfunction.
(1) Press .
The<AutoEcoView>settingmenuappears.
(2) The On/Off setting is toggled by pressing .
2-7 Setting On/Off for Power Saving mode
[Power Save]
This function allows you to set the monitor into the power saving mode
accordingtothePCstatus.
(1) Choose <PowerManager> from the Adjustment menu, and press .
(2) Choose <Power Save> from the <PowerManager> menu, and press .
The<PowerSave>settingmenuappears.
(3) Select “On” or “Off” with or , and press .
Thesettingiscompleted.
■
Analog input
ThismonitorcomplieswiththeVESADPMSstandard.
[Power Saving System]
PC Monitor
Power
Indicator
Operating Operating Blue
Power saving STAND-BY
SUSPENDED
OFF
Power saving Orange
■
Digital input
ThismonitorcomplieswiththeDVIDMPMstandard.
[Power Saving System]
Themonitorentersthepowersavingmodeinvesecondsinconnectionwith
thePCsetting.
PC Monitor Power Indicator
Operating Operating Blue
Power saving Power saving Orange
NOTE
• Be careful not to block the sensor on
the lower side of the monitor when
usingtheAutoEcoViewfunction.
NOTE
• Be careful not to block the sensor on
the lower side of the monitor when
usingtheAutoEcoViewfunction.
Attention
• Turning off the main power switch
or unplugging the power cord
completely shuts off power supply to
themonitor.
• Power consumption changes even
whenasoundinputsignalisdetected.
Attention
• Turning off the main power switch
or unplugging the power cord
completely shuts off power supply to
themonitor.
• Power consumption changes even
whenasoundinputsignalisdetected.

Eizo FlexScan S2202W Specifications

General

Brand	Eizo
Model	FlexScan S2202W
Category	Monitor
Language	English