English
30 7. SPECIFICATIONS
7. SPECIFICATIONS
CRT
55 cm (21 inch) class, 90° deflection Tension Mask with
Anti-Reflective SuperErgoCoat
®
, 0.25 mm AG Pitch
Horizontal Scan Frequency 30 kHz – 130 kHz (Automatic)
Vertical Scan Frequency 50 Hz – 160 Hz (Automatic)
Recommended Resolution 1600 dots x 1200 lines
Max .Active Display Area
*1
400 mm (H) x 298 mm (V) (15.7 (H) x 11.7 (V))
Viewable image size: 498 mm (19.6”)
Power Supply 100-120/200-240 VAC ± 10%, 50/60 Hz, 2.2 A/1.1 A
Power Consumption Normal/Max: 160 W/ 200 W**
(**With EIZO optional speaker)
PowerManager Mode 1: Less than 10 W
PowerManager Mode 2: Less than 3 W
Input Connector D-Sub mini 15 pin connector and BNC x 5 (switchable)
Input Signal Sync a) Separate, TTL, Positive/Negative
b) Composite, TTL, Positive/Negative
c) Sync on Green, 0.3 Vp-p, Negative
Input Signal Video
Analog 0.7 Vp-p/75 Ω, Positive
Signal registration 20 signals (Factory preset 2 modes)
Plug & Play VESA DDC 2B
Dimensions 494 mm (W) x 486 mm (H) x 520 mm (D)
(19.4” (W) x 19.1” (H) x 20.5” (D))
Weight
36.0 kg (79.4 lbs.)
Temperature Operating: 0 °C ~ 35 °C (32 °F to 95 °F)
Storage: -20 °C ~ 60 °C (-4 °F to 140 °F)
Humidity 30% to 80 % R.H. Non-condensing
Certifications and Standards
100-120 VAC
NRTL/C-TÜV, FCC-B, DHHS, TCO ’99
*2
, EPA ENERGY
STAR
®
Program
200-240 VAC
CE, CB, TÜV Rheinland/GS, TCO ’99
*2
, EPA ENERGY
STAR
®
Program, TÜV Eco Circle 2001
*1
Display size can be set by the user through microprocessor control panel. The actual size
displayed can be dependent on the graphics board or PC utilized.
*2
Applicable to gray (standard) color version only.
To Next Page
Loading...
Need help?
General