Eizo FORIS FS2331 User Manual (English)

Other manuals for Eizo FORIS FS2331

Setup Guide2 pages

Brochure4 pages

Questions and Answers:

W
william74Aug 18, 2025
What to do if my Eizo FORIS FS2331 Monitor has no picture and the power indicator is orange?
- R
  Roger GonzalezAug 18, 2025
  If your Eizo monitor's power indicator is lighting orange but there's no picture, try these steps: First, check if the signal cable is properly connected. Ensure that the external device connected to the monitor is turned on. Try operating the mouse or keyboard. You can also switch the input signal. If an external device is plugged into the HDMI port, change the HDCP authentication setting.
R
robertsannAug 21, 2025
How to fix the screen if it is too bright or too dark on my Eizo FORIS FS2331 Monitor?
- J
  Jerry ThompsonAug 21, 2025
  If the screen on your Eizo monitor appears too bright or too dark, use the “Brightness” or “Contrast” settings in the Setting menu to adjust it. Alternatively, you can turn on the Auto EcoView function.
A
Amanda CamachoAug 23, 2025
What to do if my Eizo FORIS FS2331 Monitor has no audio output?
- T
  Thomas TaylorAug 23, 2025
  If there is no audio output from your Eizo monitor, check the following: Ensure the stereo mini jack cable is properly connected. Verify that the volume is not set to 0. Check the current external device and audio playback software to ensure they are configured correctly. If using HDMI input, check the current external device and the “Source” setting in the Setting menu.
E
etaylorAug 26, 2025
What to do if my Eizo FORIS FS2331 has no picture and the power indicator does not light?
- D
  diane13Aug 26, 2025
  If your Eizo monitor shows no picture and the power indicator is off, check the following: Ensure the power cord is properly connected. Turn the main power off, wait a few minutes, then turn it back on. Make sure the main power switch is on. Press the power button on the remote control or the monitor itself.
L
Luis ReedAug 27, 2025
Why is the auto adjustment function not working on my Eizo FORIS FS2331?
- R
  Richard JohnsonAug 27, 2025
  The auto adjustment function may not work on your Eizo monitor for several reasons: This function does not work during digital signal input. It is intended for use on the Macintosh and on AT-compatible PC running Windows. It does not work properly when an image is displayed only on a part of the screen. This function does not work correctly with some graphics boards.
A
Anthony DavisAug 30, 2025
Why is the color on my Eizo Monitor not correct with HDMI input?
- M
  Michael HollandAug 30, 2025
  If the color shown on your Eizo display is not correct when using HDMI input, change the color space of the video signal in “Screen” - “Color Space” under the Setting menu.
H
Hector RamosSep 1, 2025
How to resolve blurred characters on my Eizo FORIS FS2331 Monitor?
- M
  Matthew MosleySep 1, 2025
  If the characters on your Eizo monitor appear blurred, check whether the PC is configured to meet the resolution and vertical scan frequency requirements of the monitor. You can also use the “Smoothing” setting in the Setting menu to adjust it.
S
Sue FaulknerSep 3, 2025
Why is my Eizo Monitor screen whitish or blackish?
- R
  Robin BrownSep 3, 2025
  If your Eizo monitor screen appears whitish or blackish, use the “Color Space” of the “Screen” submenu, “Black Level”, and “Contrast” in the Setting menu to adjust it.
K
Kristin FreemanSep 6, 2025
What does it mean if a message appears on my Eizo FORIS FS2331 Monitor?
- D
  Danielle ReynoldsSep 6, 2025
  The message on your Eizo monitor indicates that the input signal is out of the specified range. Check whether the PC is configured to meet the resolution and vertical scan frequency requirements of the monitor. Try rebooting the PC. Select an appropriate display mode using the graphics board’s utility.
W
William MorrowSep 8, 2025
Why is there noise appearing on the screen of my Eizo Monitor?
- A
  austinmontgomerySep 8, 2025
  If noise appears on the screen of your Eizo monitor, set “Overdrive” to “Off” in the Setting menu. When entering the signals of HDCP system, the normal images may not be displayed immediately.

Eizo FORIS FS2331 Specifications

General

Screen Size	23 inches
Resolution	1920 x 1080
Panel Type	IPS
Brightness	250 cd/m²
Contrast Ratio	1000:1
Response Time	6 ms
Aspect Ratio	16:9
Color Support	16.7 million colors
Viewing Angles	178° horizontal / 178° vertical
Connectivity	HDMI
Power Consumption	40 W