D
Dr. Keith GordonSep 23, 2025
Why are there green dots on my Eizo Foris FX2431 Monitor?
- SSabrina JohnsonSep 23, 2025
This is due to LCD panel characteristics and is not a failure.
To Next PageTo Next PageWhy are there green dots on my Eizo Foris FX2431 Monitor?
This is due to LCD panel characteristics and is not a failure.
What to do if my Eizo Foris FX2431 has no picture and the power indicator is off?
If your Eizo Monitor displays no picture and the power indicator does not light, check the following: * Ensure the power cord is correctly connected. * Turn the main power off, wait a few minutes, and then turn it back on. * Make sure the main power switch is on. * Press the power button on the remote control or the monitor itself.
Why is the power indicator light orange on my Eizo Foris FX2431 Monitor?
If the Eizo Monitor's power indicator lights orange, try the following: * Press any button (except the power button) on the remote control. * Move the mouse or press a key on the keyboard. * Verify that the PC is turned on.
Why is the power indicator light blue on my Eizo Monitor but there is no image?
If the Eizo Monitor's power indicator lights blue but there is no image, ensure the PC is properly connected to the monitor. You may also need to increase the [Brightness], [Contrast], and [Gain] settings to a higher level.
Why are characters pigmentized on my Eizo Monitor?
When [OutlineEnhancer] is set excessively, the characters on the screen may be affected by color.
How to correct display issues on Eizo Foris FX2431 with VIDEO1 input?
If the display on your Eizo Monitor is not correct when using VIDEO1 input, change the input signal format in [Monitor Settings] - [Advanced Settings] menu - [Color System].
Why doesn't my Eizo Foris FX2431 Monitor enter power saving mode with HDMI input?
If your Eizo Monitor does not enter power saving mode with HDMI (PC signal) input, check that the setting is “PC” in [Monitor Settings] - [Advanced Settings] menu - [Input Format].
How to fix color blurring on Eizo Foris FX2431 Monitor with VIDEO1 input?
If you are experiencing color blurring, color stripes, and point-like noise when using VIDEO1 (video signal) input on your Eizo Monitor, and the input format is NTSC or PAL, check that the setting is “Enable” in [Monitor Settings] - [Advanced Settings] menu - [3D-Y/C].
How to prevent afterimages on Eizo Foris FX2431 Monitor?
If you notice afterimages appearing on your Eizo Monitor, use a screen saver, PowerManager, or the Off Timer function when displaying an image for a long period. Also, avoid displaying the same image for extended durations.
How to fix no sound on Eizo Foris FX2431 Monitor?
If you are experiencing sound issues with your Eizo Monitor, such as no sound or unavailable volume control, verify that the audio cable is properly connected. Also, check whether headphones are connected to the headphone jack. Finally, ensure that the sound volume is appropriately adjusted.
General