Eizo Foris FX2431 - To Adjust the Brightness [Brightness]; To Adjust the Black Level [Black Level]; To Adjust the Contrast [Contrast]; To Adjust the Color Saturation [Saturation]

28
Chapter 3 Settings and Adjustments
●
To adjust the brightness [Brightness]
The screen brightness is adjusted by changing the brightness of the backlight
(Light source from the LCD back panel).
Adjustable range: 0 to 100
(1) Choose [Color] in the Setting menu and press .
(2) Choose [Brightness] in the [Color] menu and press .
The [Brightness] adjustment menu appears.
(3) Adjust the brightness with
t
or
u
, and then press .
The adjustment is completed.
●
To adjust the black level [Black Level]
The black of images is adjusted.
Red, green, and blue (RGB) consisted of the color are adjusted respectively for
PC input or HDMI (PC signal) input. RGB is adjusted together for VIDEO
input or HDMI (video signal) input.
Adjustable range: 0 to 100
(1) Choose [Color] in the Setting menu and press .
(2) Choose [Black Level] in the [Color] menu and press .
The [Black Level] adjustment menu appears.
(3) Adjust the black level with
t
or
u
, and then press .
The adjustment is completed.
●
To adjust the contrast [Contrast]
The luminance of the screen is adjusted by varying the video signal level.
Adjustable range: 0 to 100
(1) Choose [Color] in the Setting menu and press .
(2) Choose [Contrast] in the [Color] menu and press .
The [Contrast] adjustment menu appears.
(3) Adjust the contrast with
t
or
u
, and then press .
The adjustment is completed.
●
To adjust the color saturation [Saturation]
This function allows you to adjust the saturation of the color on the monitor.
Adjustable range: -50 to 50
(1) Choose [Color] in the Setting menu and press .
(2) Choose [Saturation] in the [Color] menu and press .
The [Saturation] adjustment menu appears.
(3) Adjust the saturation of the color with
t
or
u
, and then press .
The adjustment is completed.
NOTE
• You cannot adjust the value if the
function is not displayed, depending
on the color mode selected. (See
“Adjustment items in each mode” on
page 27.)
NOTE
• You cannot adjust the value if the
function is not displayed, depending
on the color mode selected. (See
“Adjustment items in each mode” on
page 27.)
NOTE
• You cannot adjust the value if the
function is not displayed, depending
on the color mode selected. (See
“Adjustment items in each mode” on
page 27.)
• In the contrast of 50, every color
gradation is displayed (PC input
only).
• When adjusting the monitor, it
is recommended to perform the
brightness adjustment which may
not lose the gradation characteristics,
prior to the contrast adjustment.
Perform the contrast adjustment in the
following cases.
– When you feel the image is dark
even if the brightness is set to 100.
(Set the contrast to higher than 50).
– When you feel the image is bright
even if the brightness is set to 0. (Set
the contrast to lower than 50).
NOTE
• You cannot adjust the value if the
function is not displayed, depending
on the color mode selected. (See
“Adjustment items in each mode” on
page 27.)
• In the contrast of 50, every color
gradation is displayed (PC input
only).
• When adjusting the monitor, it
is recommended to perform the
brightness adjustment which may
not lose the gradation characteristics,
prior to the contrast adjustment.
Perform the contrast adjustment in the
following cases.
– When you feel the image is dark
even if the brightness is set to 100.
(Set the contrast to higher than 50).
– When you feel the image is bright
even if the brightness is set to 0. (Set
the contrast to lower than 50).
Attention
• This function does not enable to
display every color gradation.
Attention
• This function does not enable to
display every color gradation.