Eizo Foris FX2431 - Power Saving Setting; To Enable;Disable the Automatic Power off Setting When no Input Signal Is Detected [No Signal Off]; To Enable;Disable the Automatic Power off Setting When no Operation Is Done [No Operation Off]

35
Chapter 3 Settings and Adjustments
3-4 Power Saving Setting
●
To enable/disable the automatic power off setting when no
input signal is detected [No Signal Off]
This function allows you to turn off the monitor automatically when the status
of no video signal input has continued for 15 minutes.
(1) Choose [PowerManager] in the Setting menu and press .
(2) Choose [No Signal Off] in the [PowerManager] menu and press .
The [No Signal Off] setting menu appears.
(3) Select “Enable” or “Disable” with
t
or
u
, and then press .
The setting is completed.
●
To enable/disable the automatic power off setting when no
operation is done [No Operation Off]
This function allows you to turn off the monitor automatically when the monitor
has not been operated with the remote control or the buttons on it for 3 hours.
(1) Choose [PowerManager] in the Setting menu and press .
(2) Choose [No Operation Off] in the [PowerManager] menu and press .
The [No Operation Off] setting menu appears.
(3) Select “Enable” or “Disable” with
t
or
u
, and then press .
The setting is completed.
Attention
• Turning off the main power switch
or unplugging the power cord
completely shuts off power supply to
the monitor.
Attention
• [No Signal Off] is available only for
VIDEO input or HDMI (video signal)
input.
NOTE
• “The power will turn off soon.”
appears on the screen one minutes
before the monitor turns off.
Attention
• Turning off the main power switch
or unplugging the power cord
completely shuts off power supply to
the monitor.
Attention
• [No Signal Off] is available only for
VIDEO input or HDMI (video signal)
input.
NOTE
• “The power will turn off soon.”
appears on the screen one minutes
before the monitor turns off.
Attention
• [No Operation Off] is available only
for VIDEO input or HDMI (video
signal) input.
NOTE
• “The power will turn off soon.”
appears on the screen one minutes
before the monitor turns off.
Attention
• [No Operation Off] is available only
for VIDEO input or HDMI (video
signal) input.
NOTE
• “The power will turn off soon.”
appears on the screen one minutes
before the monitor turns off.