8
Pairing headset or other branded Bluetooth intercoms search
Intercom connection
Rapidly flashing blue light
Intercom disconnection
Long press <phone/power button> + <Volume +>
(approx. 5s) until the red and blue lights flash
alternately and the prompt "Intercom pairing" is
displayed.
Click again on <Phone/Power Button> + <Volume +>.
The voice prompts "Intercom Searching". The red
and blue lights flash alternately.
At this point the intercom is searching for other
intercoms in the pairing state, and when it finds another
intercom, it The pairing connection is initiated.
Successful pairing
Red light and blue light flashing alternately
“Intercom Pairing”
“Intercom Searching”
Red light and blue light flashing alternately
Note: This feature is not guaranteed to be compatible with all Bluetooth headsets or
Bluetooth intercoms on the market.
HFP-enabled
intercoms
Others
To Next Page
Loading...
