EK-Quantum Reflection2 V3000 Plus D5 PWM D-RGB Plexi User Manual

USER GUIDE
DISTRIBUTION PLATE
EKQuantum
Reflection
2
V3000 Plus D5 PWM D-RGB - Plexi

EK-Quantum Reflection2 V3000 Plus D5 PWM D-RGB Plexi Specifications

General

Pump Type	D5 PWM
Lighting	D-RGB
D-RGB cable length	500mm
Outlet Ports	2x G1/4"
Fill Port	1x G1/4"
Drain Port	1x G1/4"
Material	Plexi
D-RGB connector	3-pin 5V digital LED header
Pump motor electrical specifications	12V DC
Pump electrical connector	4-pin Molex
Dimensions	200 x 200 x 80 mm
Inlet Ports	G1/4"
Case Compatibility	Lian Li O11D XL

Summary

Box Contents

Distribution Plate Dimensions

Technical Specifications and Product Parts

Preparing the Chassis

Installing the Distribution Plate

Recommended Distribution Plate Configurations

Flow Diagram

Connecting the D-RGB LED Strip

Connecting the Pump

SATA Connector

The SATA connector powers the pump and must be connected directly to the PSU.

4-pin PWM Fan Connector

Connects to motherboard/controller for pump speed control and reporting.

Testing the Loop

Support and Service

Social Media