This product is intended for installation by expert users only. Please
consult with a qualified technician since improper installation may
result in damage to the equipment. EK assumes no liability whatsoever,
expressed or implied, for the use of this product, nor its installation. The
following instructions are subject to change without notice. Please visit
our website at www.ekwb.com for updates.
Carefully read the manual before beginning with the
installation process!
SAFETY PRECAUTIONS
1. Keep and store the product away from the reach of children.
2. Check the component list and condition of the product before
installation. In case you encounter a problem, contact the shop where
you have purchased the product to get a replacement or a refund.
3. Before installation of the Vertical GPU Holder, power off your
computer and unplug the power cables.
4. EK is not responsible for any damages due to external causes,
including but not limited to: improper use, problems with electrical
power, accident, neglect, alteration, repair, improper installation, and
improper testing.
5. CPU, GPU, and motherboard are subject to damage if the product is
incorrectly installed.
6. Product design and specifications may be revised to improve quality
and performance.
To Next Page
Loading...
