EK Loop Vertical GPU Holder EVO Gen4 Riser - Required Tools; Installation Tool List

- 5 -
M3 Standoff Spacer (2x) UNC 6-32 Standoff Spacer (2x)
M3x5 Countersunk Screw (6x)
M2.5x4 Phillips Pan Head Screw (3x)
UNC 6-32x1/4” (7x)
Protective Foam 2mm (2x)
Phillips Head Screwdriver
REQUIRED TOOLS
Universal Mounting Mechanism – You may not need every
screw from this package.
EAN: 104785