Please note the installation of the product is intended to be undertaken
by an adequately trained and experienced person. You are installing the
product at your own risk. If you are not properly trained or experienced
or feel unsure about the installation procedure, please refrain from
installing the product yourself and contact our tech support for
assistance. We disclaim our liability for any damages to the product as
well as incidental, consequential, or indirect damages incurred due to
improper or inappropriate installation.
Carefully read the manual before beginning with the
installation process!
SAFETY PRECAUTIONS
1. Keep and store the product away from the reach of children.
2. Check the component list and condition of the product before
installation. In case you encounter a problem, contact the shop where
you have purchased the product to get a replacement or a refund.
3. Before installation of the Vertical GPU Holder, power off your
computer and unplug the power cables.
4. EK is not responsible for any damages due to external causes,
including but not limited to: improper use, problems with electrical
power, accident, neglect, alteration, repair, improper installation, and
improper testing.
5. CPU, GPU, and motherboard are subject to damage if the product is
incorrectly installed.
6. Product design and specifications may be revised to improve quality
and performance.
To Next Page
Loading...
