EK Vertical GPU Holder EVO - EK-Loop Vertical GPU Holder Required Tools

- 5 -
M3x5 Countersunk Screw (7x)
Standoff-UNC6-32x13x5 (2x) DP Cable (1x) Standoff M3-32x13x5 (2x)
UNC 6/32x1/4-Phillips Pan Screw ( 7x) Screw M2.5x4 DIN7985 (3x)
Protective Foam 2mm (2x)
Phillips Head Screwdriver
REQUIRED TOOLS
Mounting mechanism: You may not need all the screws from the package! EAN: 104785