eka MKF 611 CBM - Operation and Troubleshooting; Oven Troubleshooting Guide

15
5. TROUBLESHOOTING
Type of fault
Cause of the fault
Corrective action
Control panel totally off
(The oven does not work)
Non-compliant connection to the
power mains
Check the connection to the mains
No mains voltage
Restore the power supply voltage
Blown electronic board protection
fuse (with microprocessor)
Contact a skilled technician
Cooking cycle on: the oven
does not work
Door open or ajar
Close the door properly
Damaged magnetic sensor
Contact a skilled technician
Humidity/ steam cycle
activated: there is no
humidity/steam production
in the cooking chamber
Non-compliant water mains
connection
Check the connection to the water
mains
Closed stopcock
Check the cock
Obstructed water inlet filter
Clean the filter
Damaged water inlet solenoid valve
Contact a skilled technician
Closed door: steam escapes
through the gasket
Non-compliant gasket assembly
Check gasket assembly
Damaged gasket
Contact a skilled technician
Loosened handle "nose"
Contact a skilled technician
The oven does not cook
evenly
One of the motors is down or
operates at low speed
Contact a skilled technician
The motors do not reverse direction
Contact a skilled technician