EasyManua.ls Logo

ekwb EK-Nucleus AIO CR360 Dark - Safety Precautions; Product Specifications

ekwb EK-Nucleus AIO CR360 Dark
110 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
- 4 -
Please follow the instructions in this manual for proper installation. Improper installation
may result in damage to your equipment. EK Water Blocks assumes no liability whatsoever,
expressed or implied, for the use of these products, nor their installation. The following
instructions are subject to change without notice. Please visit our website at www.ekwb.com
for updates.
1. SAFETY PRECAUTIONS
1. Keep and store the product away from the reach of children.
2. Check the component list and condition of the product before installation. If there is any
problem, contact the shop where you purchased the product to get a replacement or refund.
3. EKWB d.o.o. is not responsible for any damages due to external causes, including but not
limited to, improper use, problems with electrical power, accident, neglect, alteration, repair,
improper installation, and improper testing.
4. CPU and motherboard are subject to damage if the product is incorrectly installed.
5. Excessive force exerted on the fan may cause damage to the fan and/or system.
6. This product is a CPU liquid cooling solution kit, composed of individual, original EKWB parts.
Combining this liquid cooling unit with parts, other than EK Water Blocks products, may lead
to warranty loss.
7. Product design and speci cations may be revised to improve quality and performance.
8. You must not run the pump below 20% RPM. The pump must stay within a 20-100% PWM
duty cycle at all times. We recommend always running the pump at 100%. (For help on how to
control the PWM, please refer to your motherboard instructions.)
2. SPECIFICATIONS
Model EK-Nucleus AIO CR240 Dark EK-Nucleus AIO CR360 Dark
Radiator
Dimensions 277x120x27 mm 398x120x27 mm
Fin material Al Al
Fan
Dimensions 120x120x25 mm (2x) 120x120x25 mm (3x)
Speed
550-2300 RPM ±10%
(PWM: 20-100%)
550-2300 RPM ±10%
(PWM: 20-100%)
Air Flow 72 CFM 72 CFM
Life Expectancy 70.000 hours 70.000 hours
Noise Level 36 dB 36 dB
Bearing Type FDB bearing FDB bearing
Fan Connector 4Pin 4Pin
Fan Rated Voltage 12V 12V
Pump
Dimensions (mm) 82.3x69.2x61.6 mm 82.3x69.2x61.6 mm
RPM
3100 RPM ± 10%
(PWM: 20-100%)
3100 RPM ± 10%
(PWM: 20-100%)
Life Expectancy 70.000 hours 70.000 hours
Noise Level 18.5 dB 18.5 dB
Input Current 0.37 ±10% A 0.37 ±10% A

Table of Contents

Related product manuals