ekwb EK-Nucleus AIO CR360 Dark - Intel Installation (Continued); PC Case Assembly and Pump Connection

- 7 -
STEP 9: PUMP – CONNECTING
CABLES
4-pin
PWM
STEP A:
Plug the 4-pin PWM connector from the pump
to the motherboard.
STEP 8: INSTALLING THE ASSEMBLY
OF FANS AND RADIATOR INTO A PC
CASE
Attach the assembly of radiator and the fan(s)
to the PC case with the UNC 6-32 x 6mm
screws.
EK-AIO Nucleus 240
EK-AIO Nucleus 360
UNC 6-32 x 6 mm
(8x)
UNC 6-32 x 6 mm
(12x)
Radiator on top (recommended)
Vertical placement of the radiator with
tubing at the bottom (recommended)
Avoid vertical placement of the radiator
with tubing at the top
Avoid radiator at the bottom