ekwb MSI MPG Z490 Carbon EK X User Manual

- 8 -
For Mosfet:
Use four (4) M2.5 x 5 AX1 screws with M2.5 PVC washers. Tighten
the screws evenly.
M2.5 x 5 AX1
STEP 1
STEP 2
For the MSI MPG Z490 Carbon EK X monoblock to operate properly,
the G1/4 port nearest to the right edge of the water block MUST BE
USED AS THE INLET PORT.
STEP 2
IMPORTANT:
Use this opening
as the Inlet Port!
FOR MOSFET
M2.5 PVC Washer

ekwb MSI MPG Z490 Carbon EK X Specifications

General

Brand	ekwb
Model	MSI MPG Z490 Carbon EK X
Category	Computer Hardware
Language	English