elco TRIGON L - Parameterization for End User

ParameterizationforEndUser
A
djustmentforIndividualEndUser
Requirements
Ifnobuttonsarepushedduringan
approximate8minutetimeperiod,the
systemautomaticallyrevertsbacksto
thestandarddisplay.Nochangesare
beingsaved.
23
Button Description
1 Pushoneofthetwolineselectorbuttons.Theytakeyou
directlytothe“EndUser”level.
2 Useoneofthelineselectorbuttonstoadvancetothe
respectiveline.Itisshownindisplay(1)as“Pxxx”.
3 Setthedesiredvaluesbyusingtheplusorminus
button.Thesettingissavedassoonasyouexitthe
programminglevelorswitchintoanotherline.The
followingparameterlistdisplaysallpossiblesettings.
4
or
Pusheitheroneofthesebuttonstoexitthe“EndUser”
programminglevel.
5 Pushtheinformationbuttontoexittheprogramminglevel.
Anychangedvaluesarebeingsaved.
e
n