elco TRIGON L - Accessing Operational Data

Par
ametersofGroupsb,c,anddareprovideduponrequestonly
Display
level
LMUFunctionalID Description
Temperatures(specialistlevel)
b0 DiagnoseCode LMUinternalSWdiagnosticscode
b1 TkRuec Boilerreturntemperature
b2 Tbwist2 Reservoirtemperatureatsensor2(nonexistent)
b3 Tabgas Exhausttemperature
b4 TiAussen Exteriortemperature
b5 TaGem Mixedexteriortemperature
b6 TaGed Dampenedexteriortemperature
b7 Tvist FlowtemperatureAGU2.500
b8 Notassigned
b9 Notassigned
Pro
cessvalues(specialistlevel)
c0 Notassigned
c1 IonStrom Ionizationflow
c2 Gebl_Drehz Blowerrpm
c3 Gebl_PWM_AusAkt Currentblowercontrol(PWM)
c4 RelModLevel Relativeoutput
c5 Pumpe_PWM Pumptargetvalue(PWM)
c6 ek0 Controldifference
c7 Notassigned
c8 Notassigned
c9 Notassigned
Ta
rgetvalues(specialistlevel)
d0 Notassigned
d1 Tsoll Targetvaluefor2-pointandmodulationcontrol
valve(PID)
d2 TkSoll Currentboilertargetvalue
d3 TsRaum Roomtemperaturetargetvalue
d4 TbwSoll Reservoirtargetvalue
d5 PhzMax Maximumdegreeofmodulationduringheating
mode
d6 NhzMax Maximumrpmatmaximumoutputduringheating
mode
d7 Notassigned
d8 Notassigned
d9 Notassigned
Not
e:
Byeitherpushingthe“mode”buttonor
waitingfor8minutes,thedisplay
automaticallyrevertsbacktothe
standarddisplay.
1.Pushinformationbutton.
2.Pushbuttons
foratleast3seconds.
3.Usebuttons
toselecttherespectiveparameter.
1.Pushinformationbutton.
2.Pushbuttons
foratleast3seconds.
3.Pushbutton
4.Pushbuttons
toselecttherespectiveparameter.
1.Pushinformationbutton.
2.Pushbuttons
foratleast3seconds.
3.Push2xbutton
4.Pushbuttons
toselecttherespectiveparameter.
InformationDisplay
ViaAGU2.311OperatingPanel
30
e
n