Elcometer 108 User Guide

www.elcometer.com
www.elcometer.com/images/stories/MSDS/araldite_epoxy_adhesive.pdf
www.elcometer.com/images/MSDS/elcometer_cyanoacrylate_adhesive.pdf
Material Safety Data Sheet for the adhesives supplied by Elcometer can be downloaded via our website:
®
Araldite Standard Two Part Epoxy Adhesive:
For the avoidance of doubt, please refer to the original English language version.
© Elcometer Limited 2009-2019. All rights reserved. No part of this document may be reproduced, transmitted,
transcribed, stored (in a retrieval system or otherwise) or translated into any language, in any form or by any
means (electronic, mechanical, magnetic, optical, manual or otherwise) without the prior written permission of
Elcometer Limited.
Tester Length: 520mm (20")
Tester Weight: 1.4kg (3lb)
Cyanoacrylate Adhesive:
CONTENTS
R
en-1
Section
Page
1
Overview
en-2
2
Box Contents
en-2
3
Getting Started - Digital Pressure Gauge
en-3
4
Securing the Dolly
en-4
5
Preparing the Gauge for Test
en-5
6
Performing the Test
en-6
7
Assessing the Results - Destructive Testing
en-7
8
After Test
en-7
9
Using a Dolly Plug
en-8
10
Spares & Accessories
en-9
11
Warranty Statement
en-14
12
Technical Specification
en-14
13
Legal Notices & Regulatory Information
en-15

Elcometer 108 Specifications

General

Brand	Elcometer
Model	108
Category	Test Equipment
Language	English