27
en
8.3 BACKLIGHT
The gauge display includes a backlight. The backlight can be set to one of three modes - on/off/auto.
• ON - backlight is on
• OFF - backlight is off
• AUTO - backlight automatically illuminates while the gauge is making a measurement and switches off
after several seconds (to conserve battery life).
8.3.1 To set backlight mode
Selection of backlight mode is now complete.
1. Press ON/OFF key to switch on the gauge.
2. Press DOWN key to toggle the status of the
backlight. The gauge will display OFF, On or
AutO, depending on backlight setting.
3. Repeat step 2 until the correct setting is
displayed.
1. Press ON/OFF key to switch on the gauge.
2. Press MODE key to activate features and
settings.
3. Press UP and DOWN arrow keys to scroll to
the LItE symbol. The gauge will display LItE
OFF, LItE On or LItE AutO, depending on
backlight setting.
4. Press SEND key until the correct setting is
displayed.
5. Press MODE key.
Model CG60 Model CG60DL
CG60_CG60DL_TMA_0498_00_01_23225_A6L.fm Page 27 Tuesday, November 22, 2011 12:19 PM
To Next Page
Loading...
